The PNP 3000 OBD tracker is a real-time plug and play GPS tracker that works with most vehicles built after 1996. PNP plugs right into the OBD port of your vehicle. This is the “data port”.
Included with each purchase is a covert Y-cable harness, allowing you to keep your stock OBD port open, and provides for a more discreet install. If tampering or loss of power were to take place, the PNP 3000 OBD tracker has an internal battery backup and can be easily set up to send an email or text message alert.
The PNP3000 OBD Tracker transmits data back to our servers via the Verizon data network.
Position updates are done every 1 or 2 minutes when the vehicle is moving, depending on the plan you select. You can also locate the PNP3000 OBD tracker on demand and see real-time location.
You’ll also see important vehicle related information, such as ignition status, where vehicles are stopped, vehicle idle times, speeding over posted speed limits as well as many other important data points that you may need to see.
The PNP3000 OBD tracker includes an internal battery back-up, which can be set to alert you if someone is tampering with the device. If power is lost the PNP3000 will continue to track for about two hours before the internal backup battery is completely drained.
Out of coverage for a few minutes? No worries! The PNP3000 OBD tracker is store and forward enabled, which means all data is stored and sent to our servers when the device returns to a coverage area, so you never miss any information.
For those vehicles, where the OBD port is in an intrusive location, we send with the PNP3000 OBD tracker a Y-cable splitter, which allows you to install the GPS tracker in a more covert fashion.
The PNP3000 OBD tracker is powered by the VistaTrack GPS Platform, this internet based software means you can access your account from any internet connected device.
3G OBDII vehicle tracker with internal battery back-up.
Engine Diagnostics/Fuel: Yes. View Engine Diagnostics and get fuel consumption direct from vehicle.
Battery Back-up: Yes. Set tamper/power cycle alerts.
Store & Forward Enabled: Yes, 15,000 data points.
Available Options: Hard Braking/Acceleration, Fuel Card Integration
Dimensions: 1.6″ width x 2.5″ length x 1″ height
Accelerometer: 3 axis, 16g, sampling at 400Hz for driver behavior
Communication Modes: CDMA 1xRTT packet data, UDP and SMS
Stored Messages When Out Of Coverage: 20,000 buffered messages
Location Technology: 50+ channel GPS (with SBAS)
Location Accuracy: 6 feet
Tracking Sensitivity: -162 dBm
Interface: J1850 PWM, J8150 VPW, ISO-9141-2, ISO-14230, KWP2000, ISO-15765, CAN
Operating Temperature: -40F to 167F
Operating Voltage: 9-16 VDC Vehicle Systems
Internal Battery: 200 mA
Sleep Mode Power: <2mA
Plugged Into Port: Devices extends 2″. Available Y Splitter cable for hidden install.
Fully certified FCC, CE, IC, PTCRB, applicable carriers.